Parker P75/76 Hydraulic Gear Pump Spare Parts Equipment Valve Plate&Set&Shaft

Product Description

Parker P75/76 Spare Parts Hydraulic Gear Pump Equipment Valve Plate&Set&Shaft

Product Description

P75 P76 M75 M76 Series Pump & Motor

 

Product features:

 

1, Compact structure, small volume, low noise, high pressure, wide flow range

 

2, High strength Iron casting, external gear pump

 

3, Second-seal structure, to improve pump's performance.

 

4, Thrust plate, with special structure and special surface treatment, make our pump better pressure-proof and anti-wear.

 

5, Special structure bearings, provide better capacity for heavy load and impaction.

 

6, The pump (motor) has the characteristics of serialization, standardization, and generalization.

 

7, Double and multiple assemblies are available. Pump and motor have a wide selection of mounting connection type, connection dimension is SAE standard.

 

8, Dynaco P75 P76 gear pump and M75 M76 motor can be 100% interchangeable with Parker Commercial Intertech, Permco, Muncie, Metaris MH75/76 and GPM GP175/176 gear pump and motor.

 

P75 P76 Gear Pump Performance Data

Flow ml/rev	G.W in	Rated Pressure MPa	Max pressure MPa	speed RPM Highest/Lowest	Input Power KW
67.19	1"	20.7	24.2	2400/600	64
83.99	1 1/4"	20.7	24.2	2400/600	79.5
100.78	1 1/2"	20.7	24.2	2400/600	95
117.58	1 3/4"	20.7	24.2	2400/600	110.5
134.37	2"	17.2	20.7	2400/600	105
151.18	2 1/4"	17.2	20.7	2400/600	118
167.97	2 1/2"	17.2	20.7	2400/600	132
184.77	2 3/4"	13.8	17.2	2400/600	116
201.56	3"	13.8	17.2	2400/600	126

 

M75 M76 Gear Motor Performance Data

Flow ml/rev	Input flow 2000 RPM LPM	G.W in	Rated Pressure MPa	Max Pressure MPa	Speed RPM Highest/Lowest	Output Power KW	Output Torque Nm
67.19	157	1"	20.7	24.2	2200/600	43.5	207.8
100.78	223	1 1/2"	20.7	24.2	2200/600	61.8	295.2
134.37	295	2"	17.2	20.7	2200/600	68	324.8
167.97	365	2 1/2"	17.2	20.7	2200/600	84.5	403.7
201.56	431	3"	13.8	17.2	2200/600	81.5	387

 

Available Models:
G101/102  C101/102   P30/31  P50/51  P75/76  P315  P330/350  P365
 

Detailed Photos

 

Technical Data:
P75

Item	Description	Part#		Item	Description	Part #
1 2 3 4	Snap Ring Outboard Bearing Spacer Sea Retainer "O"Ring	CM-391-2686-025 CM-391-0381-078 CM-391-3383-018 CM-391-2584-051 CM-391-2881-457		12	ntegral Drive Shaft	For reference only
				13 14 15 16	Gasket Seals Gear Housing Connecting Shaft Bearing Carrier	580-252 For reference only For reference only For reference only
5 6 7	Seal  (Pump) Seal(Motor) Shaft End Cover Check Assemblies Plug	CM-391-2883-052 CM-391-2883-094 For reference only CM-391-3681-001 CM-391-2286-004		17 18 19 20 21	Matched Gear Set Gear Housing Plug Port End Cover Name Plate	For reference only For reference only For reference only For reference only For reference only
8 9 10 11	Ring Seals Roller Bearings 568C-125 Thrust Plates	CM-391-2585-011 CM-391-0381-904 CM-391-2282-084 CM-391-2185-920		22	Drive Screws	For reference only
				23 24 25	Washers Studs or Cap Screws Nuts	For reference only For reference only For reference only

P76

Item	Description	Part#		Item	Description	Part#
1	Snap Ring	CM-391-2686-025		14	Gear Housing	For reference only
2	Outboard Bearing	CM-391-0381-078		14A	Dowel Pins	For reference only
3	Seal Retainer	CM-391-2584-051		15	Connecting Shaft	For reference only
4	"O"Ring	CM-391-2881-457		16	Bearing Carrier	For reference only
5	Seal  (Pump)	CM-391-2883-052		17	Matched Gear Set	For reference only
6	Seal  (Motor) Shaft End Cover	CM-391-2883-094 For reference only		18	Gear Housing	For reference only
				18A	Dowel Pins	For reference only
7	Check Assemblies	CM-391-3681-001		19	Plug	For reference only
8	Plug Ring Seals	CM-391-2286-004 CM-391-2585-011		20	Port End Cover	For reference only
				21	Name Plate	For reference only
9	Roller Bearings	CM-391-0381-904		22	Drive Screws	For reference only
10	Pocket Seals	568C-125		23	Washers	For reference only
11	Thrust Plates	CM-391-2185-920		24	Studs or Cap Screws	For reference only
12	ntegral Drive Shaft and Gear Set	For reference only
				25	Nuts	For reference only
13	Gasket Seals	580-252

 

Ordering codes

Model Codes:
 

DRW.NO.	DESCRIPTION	DOYLE NO.	GENERAL NO.
1	SHAFT BRG.SNAPRING		391-2686-025
2a	INPUT SHAFT BRG.		391-0381-078
2b	SPACER TO REPLACE SHAFT BEARING		391-3383-018
3a	SEAL RETAINER FOR PUMPS		391-2584-082
3b	SEAL RETAINER FOR MOTORS	HPN-090	391-2584-051
4	SEAL RETAINERO RING		391-2881-457
5a	PUMPLIPSEAL		391-2883-052
5b	MOTOR LIPSEAL		391-2883-094
6a	764 BOLTBPILOT PUMPS.EC.TYPE 42(4°or 101,6 mm pllot)	SB-1685-3	316-5037-201
6b	764 BOLTCPILOT PUMPS.E.C.TYPE78(5or 127 mm pilot)	TB-1685-3	316-5037-202
6c	764 BOLTDPILOT PUMPS.E.C.TYPE80(6"or 152,4 mm pilot)	UB-1685-3	316-5037-203
6d	762BOLT CPILOT PUMP S.E.C.TYPE 98(5"cr 127 mm pllot)	VB-1685-3	316-5027-202
6e	764BOLT BPILOT MOTORS.E.C.TYPE 42(4or 101,6mm pilot)	SB-1685-3-M	316-5037-401
61	764BOLT CPILOT MOTOR S.E.C.TYPE78(5"or 127 mm pilot)	TB-1685-3-M	316-5037-402
6g	764 BOLT D PILOT MOTOR S.E.C.TYPE 80(6"or 152,4 mm plol)	UB-1685-3-M	316-5037-403
6h	762BOLT CPILOT MOTOR S.EC.TYPE98(5"or 127 mm pilot)	VB-1685-3-M	316-5027-402
7a	CHECKVALVE    MOTOR		391-3681-001
7b	PRESSURE PLUG PUMP	HPN-091	391-2286-004
8	DOWEL PIN	HPN-086	391-2082-033
9	RING SEAL	HPN-125	391-2585-011
10	ROLLER BEARING(@2.322"0.D.)	R-1032	391-0381-060
11	POCKET SEAL		391-2882-052
12 a	PUMP THRUST PLATE	HPN-247	391-2185-026
12b	MOTOR THRUST PLATE	BA-1058	391-2185-020
12c	DRY VALVE THRUST PLATE	BA-1058DV	391-2185-072
Not Shown	DRYVALVE THRUST PLATE SEAL		391-2885-040
	FOR MORE INFORMATION OR                     EASE CONTACT US
13 a	SHAFT&GEAR 14 TOOTH SPLINE 1.228"maj.dia.TYPE7	HPN-162-XX	316-29XX-250
13b	SHAFT&GEAR 1.250*KEYED(5/16)TYPE11	HPN-215-XX	316-29XX-750
14	PUMP&MOTOR    HOUSING    GASKET		391-2884-024
15	PUMP&MOTOR   GEAR   HOUSING	SA-1688-XX	316-82XX-100
16	CONNECTING SHAFT		316-1133-001
17 a	76 MOTOR BEARING CARRIER BLANK	ZA-1687	316-7740-100
17 b	76 PUMP BEARING CARRIER WITH COMMON PASSAGE	VA-1687-11	316-7723-100
18	GEAR SET ONLY	HPN-163-XX	316-28XX-000
19	76  PUMP&MOTOR  PORT  END  COVER	YA-1603	316-3120-100
20	FLAT WASHER(5/8")		391-3784-028
21	BOLTS/STUDS(5/8°-UNC)
22	HEX NUT (5/8"-UNC)		391-1451-076
23 a	CONTINENTALSHAFT 14 TOOTH SPLINE 1.228"meJ.dia.TYPE7		316-1135-148
23b	CONTINENTAL SHAFT 1.250"KEYED(5/16")TYPE11		316-1135-147
23c	CONTINENTAL SHAFT 14 TOOTH SPLINE 1.228°.Dia.TYPE7Long		316-1500-502
23d	CONTINENTAL SHAFT 1.250"KEYED(5/16")TYPE11 Long		316-1500-501
24	CONTINENTALSHAFT BRG.RETAINER		391-3381-039
25	CONTINENTAL SHAFT BRG.RETAINER SNAP RING		391-2685-029
Not Shown	PIGGY BACK CONNECTING SHAFT		316-1133-003
Not Shown	PUMPLIP SEALFOR PIGGY BACK P.E.C.		391-2883-103
Not Shown	76 PIGGY BACK REAR PORT END COVER		316-5027-213
Not Shown	DRIVE KEY FOR TYPE 11 SHAFT		391-1781-045
Not Shown	DRY VALVE ASSEMBLY11/2"CONNECTION		316-PMV-24
Not Shown	DRY VALVE ASSEMBLY2"CONNECTION		316-PMV-32

 

Dimensional Date:

Company Profile

 

Ningbo Hyleman Hydraulics Co., Ltd is a scientific and innovative company integrating R & D, production, sales and service of high-quality hydraulic pumps, motors, valves and other hydraulic products.


Hyleman mainly provides Rexroth A4VSO, A10VSO, A4VG, A7VO, A11VO and A2FO series high-pressure piston pumps, Rexroth PGH3, PGH4 and PGH5 series high-pressure gear pumps, A4VM, A6VM, A2FM and A4FM series piston motors; BM3, BM4,BM5, BM6 and other orbit motors. Through the honing and innovation of Hyleman people, Hyleman series products can not only perfectly replace the original products, but also realize the seamless exchange and connection of all the parts. Moreover, it has lower noise, higher volume efficiency and longer service life, so as to completely surpass the quality of the original factory, and withstand the severe test of the market, has been exported to more than 70 countries and regions around the world.

Hyleman series products are widely used in engineering machinery, plastic machinery, metallurgical machinery, environmental sanitation machinery, mining machinery, marine machinery, packaging machinery, port machinery and various hydraulic equipment, which are highly praised by clients.

Hyleman has the world advanced CNC processing equipment, vertical and horizontal machining centers, high-precision double-sided grinding, groove grinding, curve grinding and full-automatic machining centers. With 12 independent testing laboratories, the products have been comprehensively inspected before shipment to ensure that Hyleman series products achieve high precision, high quality and zero defects.

"Optimizing the performance of hydraulic products, improving the quality of hydraulic products and leading the comprehensive upgrading of hydraulic product consumption" is not only the responsibility and mission of Hyleman, but also the Chinese dream of Hyleman. Hyleman are willing to work with people of insight to make unremitting efforts to realize this dream.

Warmly welcome all friends to visit the beautiful port city - Ningbo to discuss cooperation and seek common development with Hyleman!

 

Exhibitions

Packaging & Shipping

 

 

Our Advantages

 

Why Choose HYLEMAN?

1. Top Quality
Depend on 15 years experience at hydraulic pumps design, research, development and manufacturing, we have a top quality compared with domestic and overseas manufacturers, all of our products are with 1 year warranty time.

2. Strict Quality Control System
We have the most strict quality control system, all of our products are 100% tested before shipment and each of them has one tracking code in order to make sure they are with good quality to our customers.

3. Advanced machinery equipment
All the machines we have are new CNC machines we imported from Germany and Japan in order to reach more higher demand at the products accuracy.

4. Strong Technical team
Our technical team all have more than 20 years experience at pumps design and engineering, our chief engineer has more than 40 years experience at pumps design. We have one 15 persons research team, responsible for pumps improvement research and new products development.

5. Competitive Price
Because of good management, our price is more competitive than the original products, more reasonable than most of the domestic suppliers.

6. Fast Delivery time
We can ship small orders within one week, for big orders such as within 500 PCS pumps or cartridge kits usually we can make shipment within one month.

7. Warranty Period
All of our products are within 1 year warranty time after the shipment from our factory.

8. Considerate Service
We can provide technical support at any time if our customers meet any issue during the using, we will provide solutions at the soonest time.

9. Long development strategy
We would like to establish a long time strategy cooperation relationship with our customers, to promote HYLEMAN brand together, support and train the potential customer to be our agent at each country and region all over the world.